Our readers keep the lights on and the garage heater humming. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
The biggest worry with any UTV gun holder is whether your rifle stays put and keeps its zero on rough trails. A loose rack lets barrels bounce, scopes lose zero, and gear get scratched. This guide breaks down floor-standing vertical racks, overhead roll-bar clamps, and seat-belt mounts to match your side-by-side.
I’m Mo Maruf — the founder and writer behind GoCarLife. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Whether you ride a Polaris Ranger, a Can-Am Defender, or a Kawasaki Mule, the best utv gun holder keeps your firearm secure, accessible, and protected from the elements on every trip.
Our Picks at a Glance
How To Choose The Best UTV Gun Holder
Every UTV gun holder keeps a long gun secure while you drive, but the right one depends on your cab space and riding style. The three main styles—floor mounts, roll-bar clamps, and seat-belt mounts—change how your firearm sits and how much vibration it feels.
Match the mount to your cab layout
Floor mounts stand the gun upright and free up seat space, but they need a flat spot on your cab floor or cargo bed. Overhead and roll-bar clamps tuck the gun up and out of the way, but you need to check head clearance if you’re tall. Seat-belt mounts install in seconds with no tools, which makes them great for quick trips but less rigid than a bolted-down rack.
Check for adjustable height and angle
Without tilt, the barrel can hit the dash or gear shifter when sliding the gun in. Look for models with adjustable height and angle so the gun rests naturally without blocking passengers or controls.
Quick Comparison
| Model | Best For | Mounting Style | Adjustability | Build Material | Amazon |
|---|---|---|---|---|---|
| Kolpin UTV Gun Rack 20073★ Best Overall | Vertical floor mounting | Floor Mount | 27-1/2″ to 35-1/2″ height | Over-molded rubber | Amazon |
| BUNKER INDUST Gun HolderBest Value | Roll bar and cage clamps | Clamp-on | Fits 1″ to 2″ tubes | Rubber with steel bracket | Amazon |
| StarknightMT Alloy Steel RackTop Performer | Heavy loads on roll bars | Strap-on clamp | Fits 1″ to 2″ roll bars | High-strength alloy steel | Amazon |
| Kolpin Rhino XL Double 21515 | Multi-angle bar grips | Clamp-on | 360-degree rotating | Alloy steel and rubber | Amazon |
| KEMIMOTO Vertical Floor Mount | Adjustable floor standing | Floor Mount | 22.63″ to 32.48″ height | Alloy steel and rubber | Amazon |
| StarknightMT Stand-Up Mount | Rough terrain stability | Floor Mount | Adjustable height and angle | Heavy-duty steel | Amazon |
| Great Day Quick-Draw Overhead | Overhead roll bar storage | Overhead clamp | Fits 23-28in roll bar depth | Powder-coated steel | Amazon |
| Seizmik ICOS On-Seat Mount | Tool-free quick install | Seat belt mount | Universal seat fit | Closed-cell foam | Amazon |
In‑Depth Reviews
1. Kolpin UTV Gun Rack – 20073
Our pick — over 4.5★ from 950+ verified ratings; the strongest balance of quality and price.
The floor-standing veteran that handles four shotguns without breaking a sweat.
This Kolpin rack keeps your guns standing upright and out of the seat, and it earns the top spot here because its 4.6-star average across hundreds of owners is the strongest in this guide. The over-molded rubber cradle (a soft, molded grip that holds the stock) secures your firearm, while v-blocks with tough rubber straps support the barrel, so longer shotgun barrels stay put without wobbling.
Height adjusts from 27-1/2″ up to 35-1/2″, and the whole rack can angle up to 45 degrees in either direction. That flexibility means you can tilt it to clear the shifter or fit a tall rifle in a low cab. Buyers report mounting it on a 2-inch receiver step plate on the back of a side-by-side, and it handles all four shotguns “like a charm” once torqued down.
The catch is the floor requirement. The standard mount only fits flat UTV floors, so if you ride a Polaris or Yamaha with a center transmission hump, you’ll need the separate 20074 adapter riser. At 4.69 pounds it’s a solid, heavy unit that doesn’t feel cheap to mount.
Why owners stick with it
- Over-molded rubber protects firearm stocks and barrel finish
- 45-degree angle adjustment clears shifters and cabs
- Strong enough for four shotguns on a rear receiver plate
Who should look elsewhere
- Needs a flat floor — center-hump UTVs require an extra adapter
- No roll-bar clamping option for cage-mounted storage
Grab it if: you want a proven, sturdy vertical rack for a flat-floor UTV and ride with multiple long guns.
Think twice if: your machine has a transmission hump and you don’t want to buy the riser adapter.
2. BUNKER INDUST UTV Gun Holder
A versatile pair of roll-bar clamps that install without drilling a single hole.
This BUNKER INDUST set gets guns up off the floor and onto your roll cage while staying affordable. It ships as a pair with 2 mounting brackets, 2 screws, 8 rubber inserts, and a screw tool, and it clamps onto 1″, 1.5″, 1.75″, or 2″ tubes — so a roof rack, bull bar, or cage all work. The non-slip rubber inserts grip the tube tighter and dampen driving vibration, so your bar doesn’t get scraped.
The adjustable rubber straps stretch to fit different gun sizes, and owners mention installing it in the roof area of a Honda side-by-side to keep guns from “bouncing around.” One owner with a Can-Am’s angled frame liked that there were so many fitting options to choose from, since the clamps adapt to odd geometry.
The honest trade-off is installation. Some owners found it straightforward, but a few had to swap the included bolts for smaller ones to match pre-drilled holes on a Polaris Ranger cage. It’s a mild fit-note, not a dealbreaker — just expect to fiddle with the hardware on some machines.
Secure on the cage: the thing owners praise most is how well it holds gear on the roof rack, with buyers noting it keeps guns safely in place on the trail.
Install varies by machine: some riders find it tool-free easy, while others report needing a hardware swap to fit pre-drilled cages.
Reach for these if: you want an affordable pair of clamps to mount guns overhead without drilling.
Look elsewhere if: you expect a bolt-in fit on every cage — bring patience for the install on some models.
3. StarknightMT Alloy Steel Roll Bar Rack (2 Sets)
Heavy-duty steel with an 80-pound load rating for the gear-hauling crowd.
This StarknightMT rack is built for owners who carry more than just a rifle. The high-strength alloy steel bracket holds up to 80 pounds, so you can secure heavy tools or hunting gear without the bracket bending or sagging, which is the exact failure buyers warn about with flimsier clamps. It ships as two complete sets with all hardware included.
Four rubber inserts let it clamp onto 1″, 1.5″, 1.75″, or 2″ round roll bars, and the U-shaped design with soft sponge lining grips your firearm snugly to stop vibration. Owners mounted two sets across the middle bars of a Ranger crew and found “plenty of clearance” to get guns in and out, while another liked the deep shape that holds “pretty much any long pew.”
One honest con: the large bolts aren’t stainless, and some customers note they rust quickly — applying a clear coat helps. A separate note mentions the brackets can be hard to tighten without rotating, though tape helps. It’s a sturdy rack with a minor hardware caveat, not a functional flaw.
Solid build, deep grip: the quality is what wins people over, with a fit that adapts to multiple bar sizes and angles on the cage.
Watch the bolts: the non-stainless hardware can rust, so a quick clear-coat extends the life of the steel parts.
Pick this if: you need a high-capacity roll-bar rack that can handle heavy tools and multiple long guns.
skip it if: you want stainless hardware straight from the start — the included bolts need rust protection.
4. Kolpin Rhino XL Double – 21515
The 360-degree rotating grip that angles anywhere you point it.
If you’re not sure exactly where you want your gun to sit, this Kolpin Rhino XL gives you maximum freedom. The double grip rotates a full 360 degrees and adjusts multi-angle without any tools, so you can point the gun forward, backward, or sideways depending on your cab. It’s the Kolpin brand’s best-selling grip series, and the double configuration ups the carrying strength to 20 pounds for medium-weight gear.
The alloy steel and rubber construction feels rugged, and the install process involves multiple length bolts that fit different-size bars. Owners found the angle adjustment quick and easy, noting the components are “very rugged” and the whole unit “feels very sturdy” once mounted.
The recurring gripe is stability at speed. One buyer mounted it on a rear rack and found it “very bouncy” even tightened fully, worrying about a rifle in there. It’s a fit-note: work great for hunting trips to and from a blind, but aggressive terrain on a rear mount may test it.
Total angle freedom: the 360-degree rotation and tool-free adjustment make this the easiest to reposition on the fly.
Stability depends on mount: on a rear ATV rack, reviewers point out bouncing; in-cab or on a stable bar it holds firmly.
Best for: riders who want to dial in the exact angle and reposition their grip without carrying tools.
Not for: extreme, high-speed bouncing on a rear rack — pick a rigid floor mount instead.
5. KEMIMOTO Vertical Floor Mount
Twelve height levels and a 120-degree tilt for a perfect fit in any cab.
This KEMIMOTO floor mount is the most adjustable vertical rack in the lineup. The U-shaped support rod adjusts between 22.63 and 32.48 inches across 12 levels of holes, so you can dial the height precisely to your rifle. The support rod also rotates 120 degrees forward and backward, which lets you install it in reverse so it never blocks the gear shifter or passengers.
The high-elasticity rubber straps offer 9 adjustable modes, securing tools tightly even on steep roads. The base plate detaches by hand for storage without tools — you just loosen the hand-tightened nuts. Owners mounted it on a Honda Pioneer 1000 with “just enough room behind the back seats,” and it holds a daughter’s gun secure for shooting competitions.
The honest con is weight and stability. At 4.31 kg (about 9.5 pounds), it’s a heavy, solid unit, but some shoppers say it’s “not terribly stable” in certain positions, especially if you angle it far forward and need to add support pieces. Powder-coated alloy steel keeps it rust-resistant, but it demands a solid flat surface.
Precision fit: the 12 height levels and 120-degree tilt mean you can match it to nearly any cab layout.
Needs a flat, firm floor: for the best stability, mount it upright on a solid plate rather than at an extreme angle.
Choose this if: you want fine-grained height control and reverse mounting to protect your shifter.
Pass if: you have an uneven floor without a flat plate to bolt into — stability suffers there.
6. StarknightMT Stand-Up Mount
A 9.17-pound steel stand built to keep rifles stable on the roughest trails.
This StarknightMT floor mount is engineered for one thing: stability on rough terrain. The heavy-duty steel construction minimizes shaking and prevents movement so your gear stays put on trails, farms, and outdoor work environments. Its 9.17-pound weight helps reduce wobble.
The vertical space-saving design keeps guns upright to free up floor space, and the removable mounting plate detaches from the base for easy rear-passenger access or storage. Owners installed it in an open Jeep CJ7 and found the stainless steel bolts and stand rust-free while holding two scoped rifles (10 and 7.5 lbs) securely off-road, “preventing scope zeroing loss.”
The trade-off is a bit of wobble at the top with two long rifles loaded. One reviewer noted it was “a bit wobbly with 2 long rifles secured,” even though the unit itself felt well-built. Thickened rubber straps resist cracking and hold tools firmly through turns, so the wobble is a fit-note for heavy double loads, not a constant problem.
Built for the bumps: the heavy steel frame and removable plate make it a favorite for off-road rifles with scopes.
Double-load wobble: with two long rifles up high, some owners notice sway at the top of the stand.
Reach for it if: you ride rough trails and want a heavy, stable floor stand for scoped rifles.
Look elsewhere if: you always carry two long guns and hate any top-end sway — consider a roll-bar mount instead.
7. Great Day Quick-Draw Overhead Rack
The overhead rack that mounts without drilling and keeps guns out of the weather.
This Great Day rack uses the real estate above your head, holding two guns overhead with easy access. It mounts without any drilling or bolting, clamping onto UTVs with a roll-bar depth of 23 to 28 inches. The super-soft rubber gun clips grip your firearms snugly while the powder-coated black finish shrugs off rain and trail dust.
The install is famously fast — one owner had it mounted in under 3 minutes with a 1-1/8″ wrench, and another put it in immediately above the back seat. Buyers report it holds two long guns firmly with no rattling on bumpy trails, and it keeps the firearms out of the dog’s way. The thick padding and velcro straps prevent falls even on rough rides.
The catch is head clearance. Taller riders (around 6’2″) may hit their head on the rear rack, and the install spot matters — one owner noted the cap brim hits it. It’s a solid overhead solution, but you need to test your seat height before committing.
Quick and tool-light: the no-drill clamp design and fast install time are what owners rave about most.
Mind your height: tall drivers may brush the rack overhead, so position it forward or over the back seat.
Best for: riders who want guns overhead, protected from weather, with a 3-minute no-drill install.
Not for: anyone over 6 feet who needs maximum headroom in a low cab — test the clearance first.
8. Seizmik ICOS On-Seat Gun Holder
The tool-free on-seat mount that uses your seat belt to hold two firearms.
This Seizmik ICOS moves between vehicles in seconds because it requires zero tools — you just thread your existing seat belt through the foam chassis, which keeps the gun barrels pointed safely at the floor for “fantastic muzzle control.” The closed-cell foam (a dense, water-resistant padding) provides two padded channels that won’t damage your firearm’s finish or touch your optics.
The stealth design is a standout for hunters — the soft foam absorbs shock and vibrations without the noisy velcro straps that alert game. Owners call it the “best way to haul and transport guns” from home to the treestand, noting firearms stay “held firmly in place and don’t rattle around.” It fits a wide range of UTVs, including a Honda Pioneer that wasn’t even listed as compatible.
The trade-off is fit in narrow machines. In a Honda Pioneer 500 (a 50-inch-wide UTV), it’s a very tight squeeze with two people, two guns, and the holder. A 2023 Defender owner found the angle put the barrel into the dash before fully seating. Universal doesn’t mean guaranteed — measure your cab before buying.
Silent and protective: the closed-cell foam and seat-belt mounting make this the quietest, most finish-safe option here.
Check cab width: in narrow 50-inch UTVs or specific dash angles, fit gets tight and may need modification.
Ideal for: hunters who want a silent, tool-free mount they can move between machines in seconds.
Skip if: you drive a narrow 50-inch UTV or a Defender with a steep dash angle — verify clearance first.
Understanding the Specs
Mounting style: floor vs. roll bar vs. seat
Floor mounts stand guns upright and free up seat space, but need a flat 10mm-thick plate to bolt into. Roll-bar clamps attach to 1″ to 2″ tubes on your cage, keeping guns overhead and out of the way. Seat mounts use your existing seat belt for a tool-free install, trading rigidity for speed and portability.
Height and angle adjustment
Adjustable height lets your gun rest naturally instead of cramping the cab. Racks with 12 height levels and 120-degree rotation let you install in reverse to avoid the shifter and passenger space. Fixed racks are simpler but risk the barrel hitting the dash on shorter cabs.
FAQ
Will a floor mount fit my Polaris Ranger with a transmission hump?
What roll bar sizes do clamp-on holders fit?
Can I use these holders for bows or other tools?
How much weight can these racks hold?
Will a rack protect my scope from losing zero on rough trails?
Does the overhead Quick-Draw rack require drilling?
Is the Seizmik ICOS mount really tool-free?
Will these racks fit a Can-Am Maverick or Defender?
Final Thoughts: The Verdict
For most riders, the utv gun holder winner is the Kolpin UTV Gun Rack 20073 because its 45-degree angle adjustment and over-molded rubber cradle hold multiple shotguns securely with the strongest owner satisfaction in this guide. If you want a no-drill overhead option, grab the Great Day Quick-Draw — it mounts in minutes and protects guns from the weather. And for a tool-free, silent setup that moves between machines, the Seizmik ICOS is the one to reach for.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, GoCarLife earns from qualifying purchases. This does not affect which products we feature.