7 Best Truck Side Graphics | Side Stripes That Stop Traffic

Check Price on Amazon

A rugged two-pack that brings the flag home without covering your whole truck.

If a full bed-side flag feels like too much, this die-cut pair delivers the same pride in a smaller, smarter package. Each decal measures 10″ x 18″, and the die-cut style means only the flag design sticks — the black surface of your tailgate shows through everywhere else. One owner loved the subtle black-on-black look that comes from that approach.

The vinyl carries a 6-year outdoor lifespan rating and is made in the USA. Reviewers point out it’s “holding up nicely” even when it travels beyond the truck — the decals have worked great on a kayak. At 18″ long versus the American flag set’s 96″ length, this is the pick that fits a tailgate, a rear panel, or even a Jeep door with zero trimming.

Compare the two flag options head to head and the story is clear: the American flag set covers 5.3x more length at 96″ versus 18″ here, making this the accent piece and that one the statement piece. Application is straightforward, though windy days make the transfer tape tricky to handle — one owner admitted it’s a challenge but still called it worth the money.

Check Price on Amazon

A compass rose that tells everyone on the road where you’d rather be.

This 22.5″ x 22.5″ compass rose is the most personality-packed decal in the lineup, and it’s a natural fit for campers, vans, and RVs — not just pickup trucks. Owners use it to replace old factory decals after a refresh, and the difference is immediate. The vinyl is waterproof outdoor-grade material from Increation Company.

Install feedback is mixed, so know what you are getting into. Some owners call it “super easy to install,” while others say it is the hardest decal they have ever applied — one buyer put it plainly: “I had a little bit of trouble installing it but not because of the product but rather because of the me.” The vinyl can rip if handled carelessly, so go slow, use tape to hold it, and be patient.

Quality and appearance carry the day for almost everyone. One owner reports the compass “looks amazing on my van” and has collected plenty of compliments since. At 22.5″ across, it’s the widest single graphic here — compare that to the American flag set’s 9.7″ width and you can see this dominates the panel it sits on.

Check Price on Amazon

A black stripe kit measured for the Ram’s body, not a guess at it.

Some decals are universal; this one is built specifically for the Dodge Ram 1500 across model years 2009-2023. The kit is professionally measured for the truck and covers trim levels from Tradesman up through Laramie Longhorn, Limited, and Rebel. Because the stripes are die-cut, your Ram’s factory paint shows through between the black lines — a look that reads more like a dealer option than an aftermarket sticker.

You get decals for both the driver and passenger side doors, plus installation instructions. Owners who take their time get a factory-grade result: one detailed the winning method — clean the panels, keep both the panel and the sticky back wet, lay it down, then use a heat gun to speed adhesion. The total job took under 2 hours on a 2019 Ram 1500.

Quality opinions run genuinely mixed here, and the recurring theme is the roll. A few buyers report the stripes arrived rolled so tightly that creases and large bubbles never flattened out, even after letting them rest for weeks. That’s a fit-note for this product specifically, not a pattern across the whole lineup. The appearance itself wins praise whenever the install goes clean.

Check Price on Amazon

The quieter striped sibling that still gives a plain truck its own identity.

Where the American flag set shouts, this stripe kit whispers. At 72″ long and 8″ wide, it’s a subtler side graphic — and that’s exactly why some owners love it. One buyer in a region full of identical Subarus used these tone-on-tone stripes just to spot their own car in a crowded lot. It does the job without ever looking flashy.

The 3 mil air-release vinyl is the same forgiving material family as the #B1288 flag set, and owners mention easy installs when they follow the directions. It’s also a mirrored pair, so the stripes run correctly on both the right and left sides of the truck. A repeat buyer put them on both their trucks and couldn’t be happier with the quality of the graphics.

Set the two DB Graphix kits side by side: this one spans 72″ versus the flag set’s 96″, so it leaves more paint visible front and back. One owner did wish the stripes were a little brighter — they expected more pop from the multi-color design than the tone-on-tone effect delivers. It’s the honesty of that expectation gap that makes this pick a “subtle” choice rather than a “statement” one.

Check Price on Amazon

A matte-black splash kit that gives a 4-door Wrangler instant curb aggression.

Made in the USA from high-quality vinyl with a 5-year durability rating, this Splash kit is precision-cut from solid vinyl for a professional finish. The matte black look is exactly what Jeep owners want — it reads tough without the glare of a glossy decal. It’s also designed to be easily removable later, leaving no sticky residue and no surface damage when the style runs its course.

The kit comes with a guide for the do-it-yourself install, and patient customers note genuinely clean results. The gdfe-product-lede is backed by the reviews: “zero bubbles” after following the directions, with a solo installer finishing the whole thing in about 3 hours. Because it’s precision-cut from a sheet, the panels transfer design extremely easily, and any tiny bubbles that do appear tend to disappear after a day or two.

There’s a useful flexibility story hiding in the reviews too. One owner fitted it to a 2000 TJ even though it’s meant for the 2007-2016 four-door — with some careful cutting and placing, it worked and looked awesome. That’s not a promise, but it does suggest the kit is forgiving around panel shapes if you’re willing to adapt.

Check Price on Amazon

The shred pattern that survived a full year of punishment and still looks new.

This kit earns its place on real-world endurance. One owner waited a full year after installing before reviewing, and the verdict was strong: through car washes, salt and sand covered roads, mud, ice, and snow, the graphics “held up amazing.” That is long-term proof a spec sheet cannot give you. The thick vinyl adheres well, and reviewers point out the transfer tape performs exceptionally well during install.

Made in the USA with a 5-year durability rating, the matte black Shred design is precision-cut from solid vinyl with a professional finish. It’s built for the Dodge Ram 5.7 bed across 2009-2018 model years, and it’s easily removable whenever you want a change — no sticky residue, no surface damage left behind.

The appearance gets consistent compliments, and the install earns genuine positive feedback — owners call it easy and the quality good. There’s even flexibility across generations: one buyer fitted it to a 3rd-gen Ram despite the spec sheet saying it’s for the newer version, reusing the trimmed ends on the tailgate. The kind of person who plans to keep their truck for years will find the staying power here impossible to ignore.