UTV Gas Can with Mount | Secure Fuel Carriers

Running out of fuel miles from the trailer is a trip-killer. A dedicated UTV gas can with mount solves that by strapping a portable container to the machine itself, using a bracket that bolts onto the roll cage, rear rack, bed, or flat panel. The right setup keeps the can locked in place over rough terrain so you can carry extra range without bungee cords or losing cargo space.

What Fits On A UTV: Mount Styles And Capacity

Mounts come in three main styles, and the one you need depends on where you want the fuel to ride. U-bolt roll-bar mounts clamp around the cage tubing, bolt-on rack and bed mounts attach to flat surfaces, and universal plate mounts work with modular storage panels.

Capacity follows the container. The most common sizes on the market are 1 gallon, 2 gallon, 2.5 gallon, 3 gallon, 5 gallon, and 10 liters, but the container’s neck and pack design must match the mount you pick.

RotopaX, one of the best-known names in off-road fuel, sells its containers with the mounting system in mind. Its 2 Gallon Gasoline Container measures 3″ x 13 1/2″ x 18″ and uses a 2 or 4 bolt mounting pattern, which the company states is compatible with all three of its pack mount styles. The wider the mounting surface, the more stable the can feels at speed.

How A UTV Gas Can Mount Installs

Mounting a gas can to a UTV is a bolt-on job, not a welding project. The exact steps depend on the brand, but the pattern holds across the category.

• Position the mounting plate against the roll bar, rack, or bed surface where the can will sit.
• Loop the U-bolts or mounting bolts around the tubing or through the pre-drilled holes.
• Thread the included hardware and tighten evenly until the bracket has no play.
• Slide the gas can onto the mount and secure it with the locking mechanism or retention knob.

RotopaX’s own instructions say to attach the mount to nearly any rack using the included 2 or 4 bolt system. SuperATV also emphasizes bolt-on installation for its Jerry Can mounts, which use 1/8″ steel plating and a slotted design that lets the can sit flush against the bracket. The slotted holes give you some adjustment room so the mount lines up with your machine’s existing holes.

Browse our tested UTV gas can mounts if you want a side-by-side comparison of the top picks before you buy.

Safety And Compatibility Checks Before Buying

Not every mount works with every can, and not every can is safe for fuel. Check the roll bar diameter first — common sizes are 1.4″, 1.75″, and 2″ — because a U-bolt mount built for one tube size won’t clamp securely on another.

The bigger trap is the container itself. But SuperATV’s Can-Am Defender Jerry Can page states plainly: “Not for use with gas or drinking water.” That unit is not a fuel container, and using it that way is unsafe. Always confirm the exact SKU’s intended contents before pouring anything in.

RotopaX’s DLX Pack Mounts add a lock to deter theft on the trail, and the brand confirms its mount styles work across its fuel and water containers. A quick-release knob is another common feature, letting you drop the empty can in seconds at the fuel station.

FAQs