Our readers keep the lights on and the garage heater humming. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your Jeep Cherokee XJ (1984-2001) sags in the rear or bottoms out on every bump — the cure is new leaf springs. After years of use, the original leaves lose their arch, rust, and make your off-roader wallow. You need a replacement that fits your driving style and your budget. Here are four proven options, from simple stock-height swaps to serious 4-inch lift kits.
I’m Mo Maruf — the founder and writer behind GoCarLife. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Nailing your choice of xj leaf springs is the single most important suspension decision for your 1984-2001 Cherokee — if you want a factory-fresh ride or bigger tires.
Our Picks at a Glance

How To Choose The Best XJ Leaf Springs
Picking the right set for your Cherokee depends on three factors: how much lift you want, how much weight you carry, and whether you can handle a DIY install. A stock-height replacement uses the same arch as the factory part — you get the original ride back. A lift spring adds inches of extra arch so you can clear larger tires. The material (usually steel or alloy steel) determines how much abuse the spring takes before it flattens. Match the spring rate to your vehicle’s actual weight. An extra-stiff pack built for a roof tent and gear will beat you up on a daily driver with an empty cargo area.
Lift Height Vs. Ride Quality
A taller lift spring gives you more tire clearance and a tougher stance off-road. But it also changes the driveline pinion angle (the angle where the driveshaft meets the rear axle). This often needs longer shocks, a transfer case drop, or adjustable control arms. A moderate 2.5-inch lift keeps the ride smooth and avoids most extra parts. A 4-inch lift demands more hardware. If you only need to fix sag and keep the stock ride height, a direct-fit replacement is the simplest, most comfortable route.
Quick Comparison
| Model | Best For | Weight | Lift Height | Length | Amazon |
|---|---|---|---|---|---|
| Dorman 929-301★ Best Overall | Stock-height replacement | 31.6 lb | 0″ (stock) | 52 in | Amazon |
| Omix-Ada 18280.17 | OE-style heavy duty | 32 lb | 0″ (stock) | 53 in | Amazon |
| Skyjacker JC25RSB | Soft 2.5-inch lift | 38 lb | 2.5 in | 50.5 in | Amazon |
| Rough Country 8047Kit | Maximum 4-inch lift | 100 lb | 4 in | 47.75 in | Amazon |
In‑Depth Reviews
1. Dorman 929-301 Rear Leaf Spring
Our pick — 4.5★ from 350+ verified ratings; the strongest balance of quality and price.
The everyday driver’s best fix for sag that bolts straight in.
Thousands of XJ owners have used this spring to fix the Cherokee lean — and it works. The Dorman matches the factory part’s dimensions at 52 inches long, so you avoid fitment issues and driveline vibrations (the shaking that happens when the driveshaft angle is off). Owner reports say the spring corrects the sag, stops the clunking, and eliminates bottoming-out. At 31.6 pounds, it is far lighter than any lift spring, which makes installation easier under the truck.
The real-world payoff: reviewers report a measured lift of more than 3 inches at the wheel arch compared to sagged stock springs. Your Cherokee gets a proper stance again, with a ride that feels “driving like new.” The catch: in rust-belt trucks, the front eye bolt can be a serious fight because the nut is welded inside the frame rail. Plan on soaking the bolts with penetrating oil well beforehand. Be ready to cut the old bushing out if the sleeve has rust-welded itself to the bolt.
What Wins People Over
- Match-and-go fit at 52 inches long
- Bushings come pre-installed
- Restored over 3 inches of ride height for sagging Cherokees
What Requires Patience
- Rusty factory bolts can demand cutting the old spring eye out
- Takes many months to settle to final ride height
Reach for this if: you want a cost-effective stock-height swap that thousands of other XJ owners have proven works.
Look elsewhere if: you are in the rust belt and want to avoid cutting out seized hardware — budget for new bolts and some torch time.
2. Omix-Ada 18280.17 Rear Leaf Spring
The closest thing to a factory-correct heavy duty leaf pack for purists.
Omix-Ada markets this as a Heavy Duty replacement — at 32 pounds it is only a few ounces heavier than the Dorman. The key difference is the length. This spring measures 53 inches, a full inch longer than the Dorman. Buyers on 1993 and 1999 Cherokees report it fit perfectly and brought the rear back to proper factory height. It stiffens the ride in a good way, erasing the saggy stance. The manufacturer backs it with a Limited 5-Year Warranty, suggesting some confidence in durability.
The drawback: several owners say the extra length can contact the back of the unibody frame on some installations, making a screeching noise. One buyer report put it bluntly: “Springs too long at install; after 6-8 months they flattened, now rub frame causing screeching noise.” That owner had to replace the pair after a year. If your XJ already has tight clearance in the rear spring pocket (the recess where the spring mounts), the extra inch could cause more issues than it fixes.
What Stands Out
- OE reference number 52000545 for direct replacement
- Lengthens the wheelbase feel slightly with 53 inches
- 5-year warranty from a major Jeep parts supplier
The Key Risk
- Length can rub the unibody frame on some XJs
- Reports of flattening within a year of normal use
Best if: you want a heavy duty spring that exactly matches the factory part number and you are prepared for a potential fitment tweak.
Think twice if: your Cherokee is a daily driver and you cannot tolerate a spring that might rub the frame after settling.
3. Skyjacker JC25RSB 2.5-Inch Leaf Spring
The moderate, comfortable lift that plays well with soft off-road use.
The Skyjacker gives you 2.5 inches of actual lift height — enough to clear 31-inch tires without a full suspension overhaul. The ride quality is the fan favorite. One reviewer noted, “2.5” lift and a soft ride is a true statement.” The leaves flex rather than being bone-jarring stiff, which suits dune running and light wheeling. The 38-pound package weight is only 6 pounds heavier than the stock-style Dorman. Installation is still a one-person job with a jack and stands.
The trade-off: these springs sag if you load the rear down. They are not built for heavy payloads. One review noted that the overload leafs (the thick bottom leaf that engages under heavy weight) limit wheel travel on the XJ’s short wheelbase. Removing them risks over-arching and breakage. If you plan to run a drawer system, a roof tent, or tow often, this soft rate will leave you squatting.
Why Buyers Love It
- 2.5-inch lift without a harsh ride
- Pairs well with a 3-inch front coil lift
- Great for sand and trail use
The Load Limit
- Sags noticeably under heavy cargo or towing
- Stock shocks may be too short — check for full droop
Grab this for: a daily-driver lift that won’t rattle your teeth out and can still handle weekend dirt trails.
Pass if: you carry heavy gear or tow — this spring will settle under the weight.
4. Rough Country 4″ Rear Leaf Springs 8047Kit
The arch that makes 33-inch tires fit and small blocks look like rocks.
This is the big lift of the group — a full 4 inches from a name famous in the XJ world. The Rough Country spring delivers the most height here. The Rough Country springs weigh 100 pounds, while a single Dorman spring weighs 31.6 pounds. The alloy steel construction and bolt-on design come with Rough Country’s Limited Lifetime Replacement Warranty (which covers the original owner for defects, not bushing wear or bending from abuse). Buyers who got a good unit say it restored sagging rear height completely and made the Cherokee feel stable on-road and off.
The negative feedback is the loudest of any pick here. The springs are extremely stiff — a 160-pound owner reported he could not compress them by body weight alone. The finished lift measured 5.5 inches instead of the advertised 4 inches, creating a drag-car rake (nose-high, tail-low stance). Another owner found all four bushings (the rubber or polyurethane pivots in the spring eyes) shot after one trail run and 2,000 miles. The listing photo shows 5 leafs, but delivered units have 4. The manufacturer explained this as a “stock photo.”
The Potential Payoff
- Maximum 4-inch lift for big tire clearance
- Lifetime replacement warranty
- Alloy steel construction for durability
What Gives Pause
- Extremely stiff ride — not a commuter-friendly spring
- Listed as 5-leaf pack but ships with 4 leafs
- Bushing durability concerns within months of installation
Reach for it if: you are building a serious off-road rig and need the height, and you can handle a very firm ride quality.
skip it if: you want a daily-drivable lift that won’t beat you up on pavement or require constant bushing inspection.
Understanding the Specs
Lift Height vs. Spring Arch
The “lift height” number (2.5 or 4 inches) tells you how much taller the spring sits compared to a stock factory spring. A taller arch gives more tire clearance but also tilts the pinion angle (the angle of the rear axle’s input shaft). This can create driveline vibrations. For a 4-inch lift, you will likely need a transfer case drop or a slip-yoke eliminator (parts that correct the driveshaft angle) — keep that in mind before you buy.
Spring Weight and Material
A heavier spring — 38 pounds and up — usually means thicker steel leaves that handle more load and resist flattening. But that weight also makes the suspension move slower over bumps, making the ride harsher. Alloy steel resists fatigue better over time than plain steel. But it is only as good as the bushing quality and leaf pack design. A 100-pound spring like the Rough Country is overkill for a mostly-street XJ but essential for a truck that crawls rocks with a full camping setup.
FAQ
Will XJ leaf springs from a 1999 fit a 1990 Cherokee?
Do I need to replace both rear leaf springs at the same time?
How much lift will a stock-height replacement actually give me?
Can I install leaf springs with basic hand tools in my driveway?
Will a 2.5-inch lift spring clear 31-inch tires?
Do I need new shocks when I replace the leaf springs?
Why are the bushings included with some springs and not others?
How do I stop the leaf springs from squeaking?
Can I combine a leaf spring lift with a shackle lift?
Is a Limited Lifetime Replacement Warranty from Rough Country worthwhile?
Final Thoughts: The Verdict
For most people, the xj leaf springs winner is the Dorman 929-301 because it solves the sag, restores ride quality, and is backed by the largest number of real-world owner experiences — nearly 400 ratings — at the highest overall score. If you want a modest 2.5-inch lift without turning your Cherokee into a buckboard, grab the Skyjacker JC25RSB. And for a hardcore off-road build that needs every inch of clearance, the Rough Country 4-inch set will get you there, though you will need to accept a very firm ride and keep an eye on those bushings.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, GoCarLife earns from qualifying purchases. This does not affect which products we feature.



